铝锭铸锭机

1、设备运行稳定，锭面四周光滑;

1. The equipment runs stably and the ingot surface is smooth around;

2、主机架选用国标槽钢或矩形管，电气全部选用国际品牌;

2. The main frame is made of national standard steel channel or rectangular tube, and all electrical products are of international brands;

3、铸锭机采用铝液自动分配器，铝锭重量均匀；

3. The ingot casting machine is equipped with an aluminum liquid automatic distributor, so the weight of aluminum ingot is uniform;

4、采用自动抱紧脱模机构，脱模率达99%以上；

4. The ingot casting machine is equipped with an automatic clamping demolding mechanism, and the demolding rate is over 99%;

5、采用变频控制，可自由调节铸造速度（0-3.4m/min）；

5. The ingot casting machine adopts frequency conversion control, through which the casting speed (0-3.4m/min) can be adjusted freely;

6、铝锭重量分为5KG、6KG、7KG等,可根据客户的不同需求，设计铸锭模型；

6. The weight of aluminum ingot is divided into 5kg, 6kg, 7kg and so on. The ingot model can be designed according to different needs of customers.

7、设备长度约16m-22m,模具数量216-286条；

7. The length of the equipment is about 16 to 22 meeters and the number of molds is 216-286.

8、根据锭重的大小，铸锭机的产能为6.5-8t/h

8. The capacity of the ingot casting machine is 6.5 to 8 tons per hour, depending on the ingot weight

9、浇铸冷却方式：水喷淋冷却/模底过水冷却；

9. Casting cooling mode: water spray cooling or mold bottom overwater cooling;

10、铝锭脱模温度:220-250度；

10. Demolding temperature of aluminum ingot: 220 to 250°C